Advances in Production Engineering & Management
Volume 15 | Number 4 | December 2020 | pp 373–496
Contents
A layered genetic algorithm with iterative diversification for optimization of flexible job shop scheduling problems
Amjad, M.K.; Butt, S.I.; Anjum, N.; Chaudhry, I.A.; Faping, Z.; Khan, M.
https://doi.org/10.14743/apem2020.4.372
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
A review of production technologies and materials for manufacturing of cardiovascular stents
Polanec, B.; Kramberger, J.; Glodež, S.
https://doi.org/10.14743/apem2020.4.373
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
High-speed machining parametric optimization of 15CDV6 HSLA steel under minimum quantity and flood lubrication
Khawaja, A.H.; Jahanzaib, M.; Cheema, T.A.
https://doi.org/10.14743/apem2020.4.374
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Evolutionary game of green manufacturing mode of enterprises under the influence of government reward and punishment
Awaga, A.L.; Xu, W.; Liu, L.; Zhang, Y.
https://doi.org/10.14743/apem2020.4.375
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Using a discrete event simulation as an effective method applied in the production of recycled material
Knapčíková, L.; Behúnová, A.; Behún, M.
https://doi.org/10.14743/apem2020.4.376
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Effect of glass and carbon fibres on the compressive and flexural strength of the polymer concrete composite
Petruška, O.; Zajac, J.; Dupláková, D.; Simkulet, V.; Duplák, J.; Botko, F.
https://doi.org/10.14743/apem2020.4.377
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Optimal channel decision of retailers in the dual-channel supply chain considering consumer preference for delivery lead time
Hu, Y.S.; Zeng, L.H.; Huang, Z.L.; Cheng, Q.
https://doi.org/10.14743/apem2020.4.378
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
A simulation-based approach to study the influence of different production flows on manufacturing of customized products
Żywicki, K.; Rewers, P.
https://doi.org/10.14743/apem2020.4.379
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Due date optimization in multi-objective scheduling of flexible job shop production
Ojstersek, R.; Tang, M.; Buchmeister, B.
https://doi.org/10.14743/apem2020.4.380
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Advances in Production Engineering & Management
Volume 15 | Number 3 | September 2020 | pp 251–372
Contents
An exact approach for the consistent vehicle routing problem (ConVRP)
Barros, L.; Linfati, R.; Escobar, J.W.
https://doi.org/10.14743/apem2020.3.363
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Decentralized optimization of the flexible production lines
Malega, P.; Rudy, V.; Kanász, R.; Gazda, V.
https://doi.org/10.14743/apem2020.3.364
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Interactive impacts of overconfidence and fairness concern on supply chain performance
Zhang, Z.J.; Wang, P.; Wan, M.Y.; Guo, J.H.; Luo, C.L.
https://doi.org/10.14743/apem2020.3.365
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Computational analysis of cavitation at the tongue of the volute of a centrifugal pump at overload conditions
Hu, Q.; Yang, Y.; Cao, W.
https://doi.org/10.14743/apem2020.3.366
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Optimization of process performance by multiple pentagon fuzzy responses: Case studies of wire-electrical discharge machining and sputtering process
Al-Refaie, A.; Lepkova, N.; Abbasi, G.; Bani Domi, G.
https://doi.org/10.14743/apem2020.3.367
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
An integrated CNC system for chatter suppression in turning
Jasiewicz, M.; Miądlicki, K.
https://doi.org/10.14743/apem2020.3.368
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Simulation-based time evaluation of basic manual assembly tasks
Turk, M.; Pipan, M.; Šimic, M.; Herakovič, N.
https://doi.org/10.14743/apem2020.3.369
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Manufacturer’s customer satisfaction incentive plan for duopoly retailers with Cournot or collusion games
Hu, H.; Zhang, Z.; Wu, Q.; Han, S.
https://doi.org/10.14743/apem2020.3.370
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Testing of novel nano gold ink for inkjet printing
Rudolf, R.; Majerič, P.; Golub, D.; Tiyyagura, H.R.
https://doi.org/10.14743/apem2020.3.371
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Advances in Production Engineering & Management
Volume 15 | Number 2 | June 2020 | pp 121–250
Contents
Bottleneck identification and alleviation in a blocked serial production line with discrete event simulation: A case study
Li, G.Z.; Xu, Z.G.; Yang, S.L.; Wang, H.Y.; Bai, X.L.; Ren, Z.H.
https://doi.org/10.14743/apem2020.2.353
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Comparison of artificial neural network, fuzzy logic and genetic algorithm for cutting temperature and surface roughness prediction during the face milling process
Savkovic, B.; Kovac, P.; Rodic, D.; Strbac, B.; Klancnik, S.
https://doi.org/10.14743/apem2020.2.354
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Multi-criteria decision making in supply chain management based on inventory levels, environmental impact and costs
Žic, J.; Žic, S.
https://doi.org/10.14743/apem2020.2.355
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Development of family of artificial neural networks for the prediction of cutting tool condition
Spaić, O.; Krivokapić, Z.; Kramar, D.
https://doi.org/10.14743/apem2020.2.356
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Fuel gas operation management practices for reheating furnace in iron and steel industry
Chen, D.M.; Liu, Y.H.; He, S.F.; Xu, S.; Dai, F.Q.; Lu, B.
https://doi.org/10.14743/apem2020.2.357
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Coordination of dual-channel supply chain with perfect product considering sales effort
Hu, H.; Wu, Q.; Han, S.; Zhang, Z.
https://doi.org/10.14743/apem2020.2.358
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Hybrid evolution strategy approach for robust permutation flowshop scheduling
Khurshid, B.; Maqsood, S.; Omair, M.; Nawaz, R.; Akhtar, R.
https://doi.org/10.14743/apem2020.2.359
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Systematic mitigation of model sensitivity in the initiation phase of energy projects
Đaković, M.; Lalić, B.; Delić, M.; Tasić, N.; Ćirić, D.
https://doi.org/10.14743/apem2020.2.360
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
A closed loop Stackelberg game in multi-product supply chain considering information security: A case study
Babaeinesami, A.; Tohidi, H.; Seyedaliakbar, S.M.
https://doi.org/10.14743/apem2020.2.361
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Advances in Production Engineering & Management
Volume 15 | Number 1 | March 2020 | pp 1–120
Contents
Neuro-mechanistic model for cutting force prediction in helical end milling of metal materials layered in multiple directions
Zuperl, U.; Cus, F.; Zawada-Tomkiewicz, A.; Stępień, K.
https://doi.org/10.14743/apem2020.1.345
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Improvement of logistics in manufacturing system by the use of simulation modelling: A real industrial case study
Straka, M.; Khouri, S.; Lenort, R.; Besta, P.
https://doi.org/10.14743/apem2020.1.346
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Estimating the position and orientation of a mobile robot using neural network framework based on combined square-root cubature Kalman filter and simultaneous localization and mapping
Wang, D.; Tan, K.; Dong, Y.; Yuan, G.; Du, X.
https://doi.org/10.14743/apem2020.1.347
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
A comparison of the tolerance analysis methods in the open-loop assembly
Kosec, P.; Škec, S.; Miler, D.
https://doi.org/10.14743/apem2020.1.348
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Awareness and readiness of Industry 4.0: The case of Turkish manufacturing industry
Sarı, T.; Güleş, H.K.; Yiğitol, B.
https://doi.org/10.14743/apem2020.1.349
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Assembly transport optimization for a reconfigurable flow shop based on a discrete event simulation
Yang, S.L.; Xu, Z.G.; Li, G.Z.; Wang, J.Y.
https://doi.org/10.14743/apem2020.1.350
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
The impact of using different lean manufacturing tools on waste reduction
Leksic, I.; Stefanic, N.; Veza, I.
https://doi.org/10.14743/apem2020.1.351
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Integrated management systems based on risk assessment: Methodology development and case studies
Vulanović, S.; Delić, M.; Kamberović, B.; Beker, I.; Lalić, B.
https://doi.org/10.14743/apem2020.1.352
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
Communication and validation of metrological smart data in IoT-networks
Ačko, B.; Weber, H.; Hutzschenreuter, D.; Smith, I.
https://doi.org/10.14743/apem2020.1.353
ABSTRACT (HTML) |
ABSTRACT AND REFERENCES (PDF) |
FULL ARTICLE TEXT (PDF)
